Next: Getting the source code, Up: (dir) [Contents][Index]
This is the developer documentation of GNU GRUB, the GRand Unified Bootloader, a flexible and powerful boot loader program for a wide range of architectures.
This edition documents version 2.02~beta2.
This developer manual is for GNU GRUB (version 2.02~beta2, 30 April 2024).
Copyright © 1999,2000,2001,2002,2004,2005,2006,2008,2009,2010,2011 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections.
| • Getting the source code: | ||
| • Coding style: | ||
| • Finding your way around: | ||
| • Contributing Changes: | ||
| • Porting: | ||
| • Error Handling: | ||
| • Stack and heap size: | ||
| • BIOS port memory map: | ||
| • Video Subsystem: | ||
| • PFF2 Font File Format: | ||
| • Graphical Menu Software Design: | ||
| • Lockdown framework: | ||
| • Copying This Manual: | Copying This Manual | |
| • Index: |
Next: Coding style, Previous: Top, Up: Top [Contents][Index]
GRUB is maintained using the GIT revision control system. To fetch:
git clone git://git.sv.gnu.org/grub.git
Web access is available under
http://git.savannah.gnu.org/cgit/grub.git/
The branches available are:
Main development branch.
GRUB 0.97 codebase. Kept for reference and legal reasons
Multiboot specfication
Multiboot2 specfication
Prefixed with developer name. Every developer of a team manages his own branches. Developer branches do not need changelog entries.
Once you have used git clone to fetch an initial copy of a branch, you can use git pull to keep it up to date. If you have modified your local version, you may need to resolve conflicts when pulling.
Next: Finding your way around, Previous: Getting the source code, Up: Top [Contents][Index]
Basically we follow the GNU Coding Standards. We define additional conventions for GRUB here.
| • Naming Conventions: | ||
| • Functions: | ||
| • Variables: | ||
| • Types: | ||
| • Macros: | ||
| • Comments: | ||
| • Multi-Line Comments: |
Next: Functions, Up: Coding style [Contents][Index]
All global symbols (i.e. functions, variables, types, and macros) must have the prefix grub_ or GRUB_. The all capital form is used only by macros.
Next: Variables, Previous: Naming Conventions, Up: Coding style [Contents][Index]
If a function is global, its name must be prefixed with grub_ and must consist of only small letters. If the function belongs to a specific function module, the name must also be prefixed with the module name. For example, if a function is for file systems, its name is prefixed with grub_fs_. If a function is for FAT file system but not for all file systems, its name is prefixed with grub_fs_fat_. The hierarchy is noted this way.
After a prefix, a function name must start with a verb (such as get or is). It must not be a noun. Some kind of abbreviation is permitted, as long as it wouldn’t make code less readable (e.g. init).
If a function is local, its name may not start with any prefix. It must start with a verb.
Next: Types, Previous: Functions, Up: Coding style [Contents][Index]
The rule is mostly the same as functions, as noted above. If a variable is global, its name must be prefixed with grub_ and must consist of only small letters. If the variable belongs to a specific function module, the name must also be prefixed with the module name. For example, if a function is for dynamic loading, its name is prefixed with grub_dl_. If a variable is for ELF but not for all dynamic loading systems, its name is prefixed with grub_dl_elf_.
After a prefix, a variable name must start with a noun or an adjective (such as name or long) and it should end with a noun. Some kind of abbreviation is permitted, as long as it wouldn’t make code less readable (e.g. i18n).
If a variable is global in the scope of a single file (i.e. it is declared with static), its name may not start with any prefix. It must start with a noun or an adjective.
If a variable is local, you may choose any shorter name, as long as it wouldn’t make code less readable (e.g. i).
Next: Macros, Previous: Variables, Up: Coding style [Contents][Index]
The name of a type must be prefixed with grub_ and must consist of only small letters. If the type belongs to a specific function module, the name must also be prefixed with the module name. For example, if a type is for OS loaders, its name is prefixed with grub_loader_. If a type is for Multiboot but not for all OS loaders, its name is prefixed with grub_loader_linux_.
The name must be suffixed with _t, to emphasize the fact that it is a type but not a variable or a function.
Next: Comments, Previous: Types, Up: Coding style [Contents][Index]
If a macro is global, its name must be prefixed with GRUB_ and must consist of only large letters. Other rules are the same as functions or variables, depending on whether a macro is used like a function or a variable.
Next: Multi-Line Comments, Previous: Macros, Up: Coding style [Contents][Index]
All comments shall be C-style comments, of the form ‘/* … */’.
Comments shall be placed only on a line by themselves. They shall not be placed together with code, variable declarations, or other non-comment entities. A comment should be placed immediately preceding the entity it describes.
Acceptable:
/* The page # that is the front buffer. */ int displayed_page; /* The page # that is the back buffer. */ int render_page;
Unacceptable:
int displayed_page; /* The page # that is the front buffer. */ int render_page; /* The page # that is the back buffer. */
Previous: Comments, Up: Coding style [Contents][Index]
Comments spanning multiple lines shall be formatted with all lines after the first aligned with the first line.
Asterisk characters should not be repeated a the start of each subsequent line.
Acceptable:
/* This is a comment which spans multiple lines. It is long. */
Unacceptable:
/* * This is a comment * which spans multiple lines. * It is long. */
The opening ‘/*’ and closing ‘*/’ should be placed together on a line with text.
Next: Contributing Changes, Previous: Coding style, Up: Top [Contents][Index]
Here is a brief map of the GRUB code base.
GRUB uses Autoconf and Automake, with most of the Automake input generated by AutoGen. The top-level build rules are in configure.ac, grub-core/Makefile.core.def, and Makefile.util.def. Each block in a *.def file represents a build target, and specifies the source files used to build it on various platforms. The *.def files are processed into AutoGen input by gentpl.py (which you only need to look at if you are extending the build system). If you are adding a new module which follows an existing pattern, such as a new command or a new filesystem implementation, it is usually easiest to grep grub-core/Makefile.core.def and Makefile.util.def for an existing example of that pattern to find out where it should be added.
In general, code that may be run at boot time is in a subdirectory of grub-core, while code that is only run from within a full operating system is in a subdirectory of the top level.
Low-level boot code, such as the MBR implementation on PC BIOS systems, is in the grub-core/boot/ directory.
The GRUB kernel is in grub-core/kern/. This contains core facilities such as the device, disk, and file frameworks, environment variable handling, list processing, and so on. The kernel should contain enough to get up to a rescue prompt. Header files for kernel facilities, among others, are in include/.
Terminal implementations are in grub-core/term/.
Disk access code is spread across grub-core/disk/ (for accessing the disk devices themselves), grub-core/partmap/ (for interpreting partition table data), and grub-core/fs/ (for accessing filesystems). Note that, with the odd specialised exception, GRUB only contains code to read from filesystems and tries to avoid containing any code to write to filesystems; this lets us confidently assure users that GRUB cannot be responsible for filesystem corruption.
PCI and USB bus handling is in grub-core/bus/.
Video handling code is in grub-core/video/. The graphical menu system uses this heavily, but is in a separate directory, grub-core/gfxmenu/.
Most commands are implemented by files in grub-core/commands/, with the following exceptions:
There are a few other special-purpose exceptions; grep for them if they matter to you.
Next: Porting, Previous: Finding your way around, Up: Top [Contents][Index]
Contributing changes to GRUB 2 is welcomed activity. However we have a bit of control what kind of changes will be accepted to GRUB 2. Therefore it is important to discuss your changes on grub-devel mailing list (see MailingLists). On this page there are some basic details on the development process and activities.
First of all you should come up with the idea yourself what you want to contribute. If you do not have that beforehand you are advised to study this manual and try GRUB 2 out to see what you think is missing from there.
Here are additional pointers:
If you intended to make changes to GRUB Legacy (<=0.97) those are not accepted anymore.
| • Getting started: | ||
| • Typical Developer Experience: | ||
| • When you are approved for write access to project's files: |
Next: Typical Developer Experience, Up: Contributing Changes [Contents][Index]
For developers it is recommended always to use the newest development version of GRUB 2. If development takes a long period of time, please remember to keep in sync with newest developments regularly so it is much easier to integrate your change in the future. GRUB 2 is being developed in a GIT repository.
Please check Savannah’s GRUB project page for details how to get newest git: GRUB 2 git Repository
It is always good idea to first see that things work somehow and after that to start to implement new features or develop fixes to bugs.
There are sometimes odd ways to do things in GRUB 2 code base. This is mainly related to limited environment where GRUB 2 is being executed. You usually do not need to understand it all so it is better to only try to look at places that relates to your work. Please do not hesitate to ask for help if there is something that you do not understand.
Now that you know what to do and how it should work in GRUB 2 code base, please be free to develop it. If you have not so far announced your idea on grub-devel mailing list, please do it now. This is to make sure you are not wasting your time working on the solution that will not be integrated to GRUB 2 code base.
You might want to study our coding style before starting development so you do not need to change much of the code when your patch is being reviewed. (see Coding style)
For every accepted patch there has to exist a ChangeLog entry. Our ChangeLog consist of changes within source code and are not describing about what the change logically does. Please see examples from previous entries.
Also remember that GRUB 2 is licensed under GPLv3 license and that usually means that you are not allowed to copy pieces of code from other projects. Even if the source project’s license would be compatible with GPLv3, please discuss it beforehand on grub-devel mailing list.
Test that your change works properly. Try it out a couple of times, preferably on different systems, and try to find problems with it.
When you are happy with your change, first make sure it is compilable with latest development version of GRUB 2. After that please send a patch to grub-devel for review. Please describe in your email why you made the change, what it changes and so on. Please be prepared to receive even discouraging comments about your patch. There is usually at least something that needs to be improved in every patch.
Please use unified diff to make your patch (good match of arguments for diff is ‘-pruN’).
If you are asked to modify your patch, please do that and resubmit it for review. If your change is large you are required to submit a copyright agreement to FSF. Please keep in mind that if you are asked to submit for copyright agreement, process can take some time and is mandatory in order to get your changes integrated.
If you are not on grub-devel to respond to questions, most likely your patch will not be accepted. Also if problems arise from your changes later on, it would be preferable that you also fix the problem. So stay around for a while.
Good job! Your patch will now be integrated into GRUB 2 mainline, and if it didn’t break anything it will be publicly available in the next release.
Now you are welcome to do further improvements :)
Next: When you are approved for write access to project's files, Previous: Getting started, Up: Contributing Changes [Contents][Index]
The typical experience for a developer in this project is the following:
At this point, it is rather annoying that you ought to ask somebody else every change to be checked in. For efficiency, it is far better, if you can commit it yourself. Therefore, our policy is to give you the write permission to our official repository, once you have shown your skill and will, and the FSF clerks have dealt with your copyright assignment.
Previous: Typical Developer Experience, Up: Contributing Changes [Contents][Index]
As you might know, GRUB is hosted on https://savannah.gnu.org/projects/grub Savannah, thus the membership is managed by Savannah. This means that, if you want to be a member of this project:
Then, one of the admins can approve your request, and you will be a member. If you don’t want to use the Savannah interface to submit a request, you can simply notify the admins by email or something else, alternatively. But you still need to create an account beforehand.
NOTE: we sometimes receive a “Request for Inclusion” from an unknown person. In this case, the request would be just discarded, since it is too dangerous to allow a stranger to be a member, which automatically gives him a commit right to the repository, both for a legal reason and for a technical reason.
If your intention is to just get started, please do not submit a inclusion request. Instead, please subscribe to the mailing list, and communicate first (e.g. sending a patch, asking a question, commenting on another message...).
Next: Error Handling, Previous: Contributing Changes, Up: Top [Contents][Index]
GRUB2 is designed to be easily portable accross platforms. But because of the nature of bootloader every new port must be done separately. Here is how I did MIPS (loongson and ARC) and Xen ports. Note than this is more of suggestions, not absolute truth.
First of all grab any architecture specifications you can find in public (please avoid NDA).
First stage is “Hello world”. I’ve done it outside of GRUB for simplicity. Your task is to have a small program which is loadable as bootloader and clearly shows its presence to you. If you have easily accessible console you can just print a message. If you have a mapped framebuffer you know address of, you can draw a square. If you have a debug facility, just hanging without crashing might be enough. For the first stage you can choose to load the bootloader across the network since format for network image is often easier than for local boot and it skips the need of small intermediary stages and nvram handling. Additionally you can often have a good idea of the needed format by running “file” on any netbootable executable for given platform.
This program should probably have 2 parts: an assembler and C one. Assembler one handles BSS cleaning and other needed setup (on some platforms you may need to switch modes or copy the executable to its definitive position). So your code may look like (x86 assembly for illustration purposes)
.globl _start
_start:
movl $_bss_start, %edi
movl $_end, %ecx
subl %edi, %ecx
xorl %eax, %eax
cld
rep
stosb
call main
static const char msg[] = "Hello, world";
void
putchar (int c)
{
...
}
void
main (void)
{
const char *ptr = msg;
while (*ptr)
putchar (*ptr++);
while (1);
}
Sometimes you need a third file: assembly stubs for ABI-compatibility.
Once this file is functional it’s time to move it into GRUB2. The startup assembly file goes to grub-core/kern/$cpu/$platform/startup.S. You should also include grub/symbol.h and replace call to entry point with call to EXT_C(grub_main). The C file goes to grub-core/kern/$cpu/$platform/init.c and its entry point is renamed to void grub_machine_init (void). Keep final infinite loop for now. Stubs file if any goes to grub-core/kern/$cpu/$platform/callwrap.S. Sometimes either $cpu or $platform is dropped if file is used on several cpus respectivelyplatforms. Check those locations if they already have what you’re looking for.
Then modify in configure.ac the following parts:
CPU names:
case "$target_cpu" in i[[3456]]86) target_cpu=i386 ;; amd64) target_cpu=x86_64 ;; sparc) target_cpu=sparc64 ;; s390x) target_cpu=s390 ;; ... esac
Sometimes CPU have additional architecture names which don’t influence booting. You might want to have some canonical name to avoid having bunch of identical platforms with different names.
NOTE: it doesn’t influence compile optimisations which depend solely on chosen compiler and compile options.
if test "x$with_platform" = x; then
case "$target_cpu"-"$target_vendor" in
i386-apple) platform=efi ;;
i386-*) platform=pc ;;
x86_64-apple) platform=efi ;;
x86_64-*) platform=pc ;;
powerpc-*) platform=ieee1275 ;;
...
esac
else
...
fi
This part deals with guessing the platform from CPU and vendor. Sometimes you need to use 32-bit mode for booting even if OS runs in 64-bit one. If so add your platform to:
case "$target_cpu"-"$platform" in x86_64-efi) ;; x86_64-emu) ;; x86_64-*) target_cpu=i386 ;; powerpc64-ieee1275) target_cpu=powerpc ;; esac
Add your platform to the list of supported ones:
case "$target_cpu"-"$platform" in i386-efi) ;; x86_64-efi) ;; i386-pc) ;; i386-multiboot) ;; i386-coreboot) ;; ... esac
If explicit -m32 or -m64 is needed add it to:
case "$target_cpu" in i386 | powerpc) target_m32=1 ;; x86_64 | sparc64) target_m64=1 ;; esac
Finally you need to add a conditional to the following block:
AM_CONDITIONAL([COND_mips_arc], [test x$target_cpu = xmips -a x$platform = xarc]) AM_CONDITIONAL([COND_sparc64_ieee1275], [test x$target_cpu = xsparc64 -a x$platform = xieee1275]) AM_CONDITIONAL([COND_powerpc_ieee1275], [test x$target_cpu = xpowerpc -a x$platform = xieee1275])
Next stop is gentpl.py. You need to add your platform to the list of supported ones (sorry that this list is duplicated):
GRUB_PLATFORMS = [ "emu", "i386_pc", "i386_efi", "i386_qemu", "i386_coreboot",
"i386_multiboot", "i386_ieee1275", "x86_64_efi",
"mips_loongson", "sparc64_ieee1275",
"powerpc_ieee1275", "mips_arc", "ia64_efi",
"mips_qemu_mips", "s390_mainframe" ]
You may also want already to add new platform to one or several of available groups. In particular we always have a group for each CPU even when only one platform for given CPU is available.
Then comes grub-core/Makefile.core.def. In the block “kernel” you’ll need to define ldflags for your platform ($cpu_$platform_ldflags). You also need to declare startup asm file ($cpu_$platform_startup) as well as any other files (e.g. init.c and callwrap.S) (e.g. $cpu_$platform = kern/$cpu/$platform/init.c). At this stage you will also need to add dummy dl.c and cache.S with functions grub_err_t grub_arch_dl_check_header (void *ehdr), grub_err_t grub_arch_dl_relocate_symbols (grub_dl_t mod, void *ehdr) (dl.c) and void grub_arch_sync_caches (void *address, grub_size_t len) (cache.S). They won’t be used for now.
You will need to create directory include/$cpu/$platform and a file include/$cpu/types.h. The later folowing this template:
#ifndef GRUB_TYPES_CPU_HEADER #define GRUB_TYPES_CPU_HEADER 1 /* The size of void *. */ #define GRUB_TARGET_SIZEOF_VOID_P 4 /* The size of long. */ #define GRUB_TARGET_SIZEOF_LONG 4 /* mycpu is big-endian. */ #define GRUB_TARGET_WORDS_BIGENDIAN 1 /* Alternatively: mycpu is little-endian. */ #undef GRUB_TARGET_WORDS_BIGENDIAN #endif /* ! GRUB_TYPES_CPU_HEADER */
You will also need to add a dummy file to datetime and setjmp modules to avoid any of it having no files. It can be just completely empty at this stage.
You’ll need to make grub-mkimage.c (util/grub_mkimage.c) aware of the needed format. For most commonly used formats like ELF, PE, aout or raw the support is already present and you’ll need to make it follow the existant code paths for your platform adding adjustments if necessary. When done compile:
./autogen.sh ./configure --target=$cpu --with-platform=$platform TARGET_CC=.. OBJCOPY=... STRIP=... make > /dev/null
And create image
./grub-mkimage -d grub-core -O $format_id -o test.img
And it’s time to test your test.img.
If it works next stage is to have heap, console and timer.
To have the heap working you need to determine which regions are suitable for heap usage, allocate them from firmware and map (if applicable). Then call grub_mm_init_region (vois *start, grub_size_t s) for every of this region. As a shortcut for early port you can allocate right after _end or have a big static array for heap. If you do you’ll probably need to come back to this later. As for output console you should distinguish between an array of text, terminfo or graphics-based console. Many of real-world examples don’t fit perfectly into any of these categories but one of the models is easier to be used as base. In second and third case you should add your platform to terminfokernel respectively videoinkernel group. A good example of array of text is i386-pc (kern/i386/pc/init.c and term/i386/pc/console.c). Of terminfo is ieee1275 (kern/ieee1275/init.c and term/ieee1275/console.c). Of video is loongson (kern/mips/loongson/init.c). Note that terminfo has to be inited in 2 stages: one before (to get at least rudimentary console as early as possible) and another after the heap (to get full-featured console). For the input there are string of keys, terminfo and direct hardware. For string of keys look at i386-pc (same files), for termino ieee1275 (same files) and for hardware loongson (kern/mips/loongson/init.c and term/at_keyboard.c).
For the timer you’ll need to call grub_install_get_time_ms (...) with as sole argument a function returning a grub_uint64_t of a number of milliseconds elapsed since arbitrary point in the past.
Once these steps accomplished you can remove the inifinite loop and you should be able to get to the minimal console. Next step is to have module loading working. For this you’ll need to fill kern/$cpu/dl.c and kern/$cpu/cache.S with real handling of relocations and respectively the real sync of I and D caches. Also you’ll need to decide where in the image to store the modules. Usual way is to have it concatenated at the end. In this case you’ll need to modify startup.S to copy modules out of bss to let’s say ALIGN_UP (_end, 8) before cleaning out bss. You’ll probably find useful to add total_module_size field to startup.S. In init.c you need to set grub_modbase to the address where modules can be found. You may need grub_modules_get_end () to avoid declaring the space occupied by modules as usable for heap. You can test modules with:
./grub-mkimage -d grub-core -O $format_id -o test.img hello
and then running “hello” in the shell.
Once this works, you should think of implementing disk access. Look around disk/ for examples.
Then, very importantly, you probably need to implement the actual loader (examples available in loader/)
Last step to have minimally usable port is to add support to grub-install to put GRUB in a place where firmware or platform will pick it up.
Next steps are: filling datetime.c, setjmp.S, network (net/drivers), video (video/), halt (lib/), reboot (lib/).
Please add your platform to Platform limitations and Supported kernels chapter in user documentation and mention any steps you skipped which result in reduced features or performance. Here is the quick checklist of features. Some of them are less important than others and skipping them is completely ok, just needs to be mentioned in user documentation.
Checklist:
Next: Stack and heap size, Previous: Porting, Up: Top [Contents][Index]
Error handling in GRUB 2 is based on exception handling model. As C language doesn’t directly support exceptions, exception handling behavior is emulated in software.
When exception is raised, function must return to calling function. If calling function does not provide handling of the exception it must return back to its calling function and so on, until exception is handled. If exception is not handled before prompt is displayed, error message will be shown to user.
Exception information is stored on grub_errno global variable. If
grub_errno variable contains value GRUB_ERR_NONE, there is no active
exception and application can continue normal processing. When grub_errno has
other value, it is required that application code either handles this error or
returns instantly to caller. If function is with return type grub_err_t is
about to return GRUB_ERR_NONE, it should not set grub_errno to that
value. Only set grub_errno in cases where there is error situation.
Simple exception forwarder.
grub_err_t
forwarding_example (void)
{
/* Call function that might cause exception. */
foobar ();
/* No special exception handler, just forward possible exceptions. */
if (grub_errno != GRUB_ERR_NONE)
{
return grub_errno;
}
/* All is OK, do more processing. */
/* Return OK signal, to caller. */
return GRUB_ERR_NONE;
}
Error reporting has two components, the actual error code (of type
grub_err_t) and textual message that will be displayed to user. List of
valid error codes is listed in header file include/grub/err.h. Textual
error message can contain any textual data. At time of writing, error message
can contain up to 256 characters (including terminating NUL). To ease error
reporting there is a helper function grub_error that allows easier
formatting of error messages and should be used instead of writing directly to
global variables.
Example of error reporting.
grub_err_t
failing_example ()
{
return grub_error (GRUB_ERR_FILE_NOT_FOUND,
"Failed to read %s, tried %d times.",
"test.txt",
10);
}
If there is a special reason that error code does not need to be taken account,
grub_errno can be zeroed back to GRUB_ERR_NONE. In cases like this all
previous error codes should have been handled correctly. This makes sure that
there are no unhandled exceptions.
Example of zeroing grub_errno.
grub_err_t
probe_example ()
{
/* Try to probe device type 1. */
probe_for_device ();
if (grub_errno == GRUB_ERR_NONE)
{
/* Device type 1 was found on system. */
register_device ();
return GRUB_ERR_NONE;
}
/* Zero out error code. */
grub_errno = GRUB_ERR_NONE;
/* No device type 1 found, try to probe device type 2. */
probe_for_device2 ();
if (grub_errno == GRUB_ERR_NONE)
{
/* Device type 2 was found on system. */
register_device2 ();
return GRUB_ERR_NONE;
}
/* Zero out error code. */
grub_errno = GRUB_ERR_NONE;
/* Return custom error message. */
return grub_error (GRUB_ERR_UNKNOWN_DEVICE, "No device type 1 or 2 found.");
}
Some times there is a need to continue processing even if there is a error
state in application. In situations like this, there is a needed to save old
error state and then call other functions that might fail. To aid in this,
there is a error stack implemented. Error state can be pushed to error stack
by calling function grub_error_push (). When processing has been completed,
grub_error_pop () can be used to pop error state from stack. Error stack
contains predefined amount of error stack items. Error stack is protected for
overflow and marks these situations so overflow error does not get unseen.
If there is no space available to store error message, it is simply discarded
and overflow will be marked as happened. When overflow happens, it most likely
will corrupt error stack consistency as for pushed error there is no matching
pop, but overflow message will be shown to inform user about the situation.
Overflow message will be shown at time when prompt is about to be drawn.
Example usage of error stack.
/* Save possible old error message. */
grub_error_push ();
/* Do your stuff here. */
call_possibly_failing_function ();
if (grub_errno != GRUB_ERR_NONE)
{
/* Inform rest of the code that there is error (grub_errno
is set). There is no pop here as we want both error states
to be displayed. */
return;
}
/* Restore old error state by popping previous item from stack. */
grub_error_pop ();
Next: BIOS port memory map, Previous: Error Handling, Up: Top [Contents][Index]
On emu stack and heap are just normal host OS stack and heap. Stack is typically 8 MiB although it’s OS-dependent.
On i386-pc, i386-coreboot, i386-qemu and i386-multiboot the stack is 60KiB. All available space between 1MiB and 4GiB marks is part of heap.
On *-xen stack is 4MiB. If compiled for x86-64 with GCC 4.4 or later adressable space is unlimited. When compiled for x86-64 with older GCC version adressable space is limited to 2GiB. When compiling for i386 adressable space is limited to 4GiB. All adressable pages except the ones for stack, GRUB binary, special pages and page table are in the heap.
On *-efi GRUB uses same stack as EFI. If compiled for x86-64 with GCC 4.4 or later adressable space is unlimited. When compiled for x86-64 with older GCC version adressable space is limited to 2GiB. For all other platforms adressable space is limited to 4GiB. GRUB allocates pages from EFI for its heap, at most 1.6 GiB.
On i386-ieee1275 and powerpc-ieee1275 GRUB uses same stack as IEEE1275. It allocates at most 32MiB for its heap.
On sparc64-ieee1275 stack is 256KiB and heap is 2MiB.
On mips(el)-qemu_mips and mipsel-loongson stack is 2MiB (everything below GRUB image) and everything above GRUB image (from 2MiB + kernel size) until 256MiB is part of heap.
On mips-arc stack is 2MiB (everything below GRUB image) and everything above GRUB image(from 2MiB + kernel size) until 128MiB is part of heap.
On mipsel-arc stack is 2MiB (everything below GRUB image which is not part of ARC) and everything above GRUB image (from 7MiB + kernel size) until 256MiB is part of heap.
On arm-uboot stack is 256KiB and heap is 2MiB.
In short:
| Platform | Stack | Heap |
|---|---|---|
| emu | 8 MiB | ? |
| i386-pc | 60 KiB | < 4 GiB |
| i386-coreboot | 60 KiB | < 4 GiB |
| i386-multiboot | 60 KiB | < 4 GiB |
| i386-qemu | 60 KiB | < 4 GiB |
| *-efi | ? | < 1.6 GiB |
| i386-ieee1275 | ? | < 32 MiB |
| powerpc-ieee1275 | ? | < 32 MiB |
| sparc64-ieee1275 | 256KiB | 2 MiB |
| arm-uboot | 256KiB | 2 MiB |
| mips(el)-qemu_mips | 2MiB | 253 MiB |
| mipsel-loongson | 2MiB | 253 MiB |
| mips-arc | 2MiB | 125 MiB |
| mipsel-arc | 2MiB | 248 MiB |
| x86_64-xen (GCC >= 4.4) | 4MiB | unlimited |
| x86_64-xen (GCC < 4.4) | 4MiB | < 2GiB |
| i386-xen | 4MiB | < 4GiB |
Next: Video Subsystem, Previous: Stack and heap size, Up: Top [Contents][Index]
| Start | End | Usage |
|---|---|---|
| 0 | 0x1000 - 1 | BIOS and real mode interrupts |
| 0x07BE | 0x07FF | Partition table passed to another boot loader |
| ? | 0x2000 - 1 | Real mode stack |
| 0x7C00 | 0x7D00 - 1 | Boot sector |
| 0x8000 | ? | GRUB kernel |
| 0x68000 | 0x71000 - 1 | Disk buffer |
| ? | 0x80000 - 1 | Protected mode stack |
| ? | 0xA0000 - 1 | Extended BIOS Data Area |
| 0xA0000 | 0xC0000 - 1 | Video RAM |
| 0xC0000 | 0x100000 - 1 | BIOS |
| 0x100000 | ? | Heap and module code |
Next: PFF2 Font File Format, Previous: BIOS port memory map, Up: Top [Contents][Index]
This document contains specification for Video Subsystem for GRUB2. Currently only the usage interface is described in this document. Internal structure of how video drivers are registering and how video driver manager works are not included here.
| • Video API: | ||
| • Example usage of Video API: | ||
| • Bitmap API: |
Next: Example usage of Video API, Up: Video Subsystem [Contents][Index]
grub_err_t grub_video_setup (unsigned int width, unsigned int height, unsigned int mode_type);
Driver will use information provided to it to select best possible video mode and switch to it. Supported values for mode_type are GRUB_VIDEO_MODE_TYPE_INDEX_COLOR for index color modes, GRUB_VIDEO_MODE_TYPE_RGB for direct RGB color modes and GRUB_VIDEO_MODE_TYPE_DOUBLE_BUFFERED for double buffering. When requesting RGB mode, highest bits per pixel mode will be selected. When requesting Index color mode, mode with highest number of colors will be selected. If all parameters are specified as zero, video adapter will try to figure out best possible mode and initialize it, platform specific differences are allowed here. If there is no mode matching request, error X will be returned. If there are no problems, function returns GRUB_ERR_NONE.
This function also performs following task upon succesful mode switch. Active rendering target is changed to screen and viewport is maximized to allow whole screen to be used when performing graphics operations. In RGB modes, emulated palette gets 16 entries containing default values for VGA palette, other colors are defined as black. When switching to Indexed Color mode, driver may set default VGA palette to screen if the video card allows the operation.
grub_err_t grub_video_restore (void);
Video subsystem will deinitialize activated video driver to restore old state of video device. This can be used to switch back to text mode.
grub_err_t grub_video_get_info (struct grub_video_mode_info *mode_info);
struct grub_video_mode_info
{
/* Width of the screen. */
unsigned int width;
/* Height of the screen. */
unsigned int height;
/* Mode type bitmask. Contains information like is it Index color or
RGB mode. */
unsigned int mode_type;
/* Bits per pixel. */
unsigned int bpp;
/* Bytes per pixel. */
unsigned int bytes_per_pixel;
/* Pitch of one scanline. How many bytes there are for scanline. */
unsigned int pitch;
/* In index color mode, number of colors. In RGB mode this is 256. */
unsigned int number_of_colors;
/* Optimization hint how binary data is coded. */
enum grub_video_blit_format blit_format;
/* How many bits are reserved for red color. */
unsigned int red_mask_size;
/* What is location of red color bits. In Index Color mode, this is 0. */
unsigned int red_field_pos;
/* How many bits are reserved for green color. */
unsigned int green_mask_size;
/* What is location of green color bits. In Index Color mode, this is 0. */
unsigned int green_field_pos;
/* How many bits are reserved for blue color. */
unsigned int blue_mask_size;
/* What is location of blue color bits. In Index Color mode, this is 0. */
unsigned int blue_field_pos;
/* How many bits are reserved in color. */
unsigned int reserved_mask_size;
/* What is location of reserved color bits. In Index Color mode,
this is 0. */
unsigned int reserved_field_pos;
};
Software developer can use this function to query properties of active rendering taget. Information provided here can be used by other parts of GRUB, like image loaders to convert loaded images to correct screen format to allow more optimized blitters to be used. If there there is no configured video driver with active screen, error GRUB_ERR_BAD_DEVICE is returned, otherwise mode_info is filled with valid information and GRUB_ERR_NONE is returned.
enum grub_video_blit_format grub_video_get_blit_format (struct grub_video_mode_info *mode_info);
enum grub_video_blit_format
{
/* Follow exactly field & mask information. */
GRUB_VIDEO_BLIT_FORMAT_RGBA,
/* Make optimization assumption. */
GRUB_VIDEO_BLIT_FORMAT_R8G8B8A8,
/* Follow exactly field & mask information. */
GRUB_VIDEO_BLIT_FORMAT_RGB,
/* Make optimization assumption. */
GRUB_VIDEO_BLIT_FORMAT_R8G8B8,
/* When needed, decode color or just use value as is. */
GRUB_VIDEO_BLIT_FORMAT_INDEXCOLOR
};
Used to query how data could be optimized to suit specified video mode. Returns exact video format type, or a generic one if there is no definition for the type. For generic formats, use grub_video_get_info to query video color coding settings.
grub_err_t grub_video_set_palette (unsigned int start, unsigned int count, struct grub_video_palette_data *palette_data);
struct grub_video_palette_data
{
grub_uint8_t r; /* Red color value (0-255). */
grub_uint8_t g; /* Green color value (0-255). */
grub_uint8_t b; /* Blue color value (0-255). */
grub_uint8_t a; /* Reserved bits value (0-255). */
};
Used to setup indexed color palettes. If mode is RGB mode, colors will be set to emulated palette data. In Indexed Color modes, palettes will be set to hardware. Color values will be converted to suit requirements of the video mode. start will tell what hardware color index (or emulated color index) will be set to according information in first indice of palette_data, after that both hardware color index and palette_data index will be incremented until count number of colors have been set.
grub_err_t grub_video_get_palette (unsigned int start, unsigned int count, struct grub_video_palette_data *palette_data);
struct grub_video_palette_data
{
grub_uint8_t r; /* Red color value (0-255). */
grub_uint8_t g; /* Green color value (0-255). */
grub_uint8_t b; /* Blue color value (0-255). */
grub_uint8_t a; /* Reserved bits value (0-255). */
};
Used to query indexed color palettes. If mode is RGB mode, colors will be copied from emulated palette data. In Indexed Color modes, palettes will be read from hardware. Color values will be converted to suit structure format. start will tell what hardware color index (or emulated color index) will be used as a source for first indice of palette_data, after that both hardware color index and palette_data index will be incremented until count number of colors have been read.
grub_err_t grub_video_set_area_status (grub_video_area_status_t area_status);
enum grub_video_area_status_t
{
GRUB_VIDEO_AREA_DISABLED,
GRUB_VIDEO_AREA_ENABLED
};
Used to set area drawing mode for redrawing the specified region. Draw commands are performed in the intersection of the viewport and the region called area. Coordinates remain related to the viewport. If draw commands try to draw over the area, they are clipped. Set status to DISABLED if you need to draw everything. Set status to ENABLED and region to the desired rectangle to redraw everything inside the region leaving everything else intact. Should be used for redrawing of active elements.
grub_err_r grub_video_get_area_status (grub_video_area_status_t *area_status);
grub_err_t grub_video_set_viewport (unsigned int x, unsigned int y, unsigned int width, unsigned int height);
Used to specify viewport where draw commands are performed. When viewport is set, all draw commands coordinates relate to those specified by x and y. If draw commands try to draw over viewport, they are clipped. If developer requests larger than possible viewport, width and height will be clamped to fit screen. If x and y are out of bounds, all functions drawing to screen will not be displayed. In order to maximize viewport, use grub_video_get_info to query actual screen dimensions and provide that information to this function.
grub_err_t grub_video_get_viewport (unsigned int *x, unsigned int *y, unsigned int *width, unsigned int *height);
Used to query current viewport dimensions. Software developer can use this to choose best way to render contents of the viewport.
grub_err_t grub_video_set_region (unsigned int x, unsigned int y, unsigned int width, unsigned int height);
Used to specify the region of the screen which should be redrawn. Use absolute values. When the region is set and area status is ENABLE all draw commands will be performed inside the interseption of region and viewport named area. If draw commands try to draw over viewport, they are clipped. If developer requests larger than possible region, width and height will be clamped to fit screen. Should be used for redrawing of active elements.
grub_err_t grub_video_get_region (unsigned int *x, unsigned int *y, unsigned int *width, unsigned int *height);
Used to query current region dimensions.
grub_video_color_t grub_video_map_color (grub_uint32_t color_name);
Map color can be used to support color themes in GRUB. There will be collection of color names that can be used to query actual screen mapped color data. Examples could be GRUB_COLOR_CONSOLE_BACKGROUND, GRUB_COLOR_CONSOLE_TEXT. The actual color defines are not specified at this point.
grub_video_color_t grub_video_map_rgb (grub_uint8_t red, grub_uint8_t green, grub_uint8_t blue);
Map RGB values to compatible screen color data. Values are expected to be in range 0-255 and in RGB modes they will be converted to screen color data. In index color modes, index color palette will be searched for specified color and then index is returned.
grub_video_color_t grub_video_map_rgba (grub_uint8_t red, grub_uint8_t green, grub_uint8_t blue, grub_uint8_t alpha);
Map RGBA values to compatible screen color data. Values are expected to be in range 0-255. In RGBA modes they will be converted to screen color data. In index color modes, index color palette will be searched for best matching color and its index is returned.
grub_err_t grub_video_unmap_color (grub_video_color_t color, grub_uint8_t *red, grub_uint8_t *green, grub_uint8_t *blue, grub_uint8_t *alpha);
Unmap color value from color to color channels in red, green, blue and alpha. Values will be in range 0-255. Active rendering target will be used for color domain. In case alpha information is not available in rendering target, it is assumed to be opaque (having value 255).
grub_err_t grub_video_fill_rect (grub_video_color_t color, int x, int y, unsigned int width, unsigned int height);
Fill specified area limited by given coordinates within specified viewport. Negative coordinates are accepted in order to allow easy moving of rectangle within viewport. If coordinates are negative, area of the rectangle will be shrinken to follow size limits of the viewport.
Software developer should use either grub_video_map_color, grub_video_map_rgb or grub_video_map_rgba to map requested color to color parameter.
grub_err_t grub_video_blit_glyph (struct grub_font_glyph *glyph, grub_video_color_t color, int x, int y);
struct grub_font_glyph {
/* TBD. */
};
Used to blit glyph to viewport in specified coodinates. If glyph is at edge of viewport, pixels outside of viewport will be clipped out. Software developer should use either grub_video_map_rgb or grub_video_map_rgba to map requested color to color parameter.
grub_err_t grub_video_blit_bitmap (struct grub_video_bitmap *bitmap, enum grub_video_blit_operators oper, int x, int y, int offset_x, int offset_y, unsigned int width, unsigned int height);
struct grub_video_bitmap
{
/* TBD. */
};
enum grub_video_blit_operators
{
GRUB_VIDEO_BLIT_REPLACE,
GRUB_VIDEO_BLIT_BLEND
};
Used to blit bitmap to viewport in specified coordinates. If part of bitmap is outside of viewport region, it will be clipped out. Offsets affect bitmap position where data will be copied from. Negative values for both viewport coordinates and bitmap offset coordinates are allowed. If data is looked out of bounds of bitmap, color value will be assumed to be transparent. If viewport coordinates are negative, area of the blitted rectangle will be shrinken to follow size limits of the viewport and bitmap. Blitting operator oper specifies should source pixel replace data in screen or blend with pixel alpha value.
Software developer should use grub_video_bitmap_create or grub_video_bitmap_load to create or load bitmap data.
grub_err_t grub_video_blit_render_target (struct grub_video_render_target *source, enum grub_video_blit_operators oper, int x, int y, int offset_x, int offset_y, unsigned int width, unsigned int height);
struct grub_video_render_target {
/* This is private data for video driver. Should not be accessed from elsewhere directly. */
};
enum grub_video_blit_operators
{
GRUB_VIDEO_BLIT_REPLACE,
GRUB_VIDEO_BLIT_BLEND
};
Used to blit source render target to viewport in specified coordinates. If part of source render target is outside of viewport region, it will be clipped out. If blitting operator is specified and source contains alpha values, resulting pixel color components will be calculated using formula ((src_color * src_alpha) + (dst_color * (255 - src_alpha)) / 255, if target buffer has alpha, it will be set to src_alpha. Offsets affect render target position where data will be copied from. If data is looked out of bounds of render target, color value will be assumed to be transparent. Blitting operator oper specifies should source pixel replace data in screen or blend with pixel alpha value.
grub_err_t grub_video_scroll (grub_video_color_t color, int dx, int dy);
Used to scroll viewport to specified direction. New areas are filled with specified color. This function is used when screen is scroller up in video terminal.
grub_err_t grub_video_swap_buffers (void);
If double buffering is enabled, this swaps frontbuffer and backbuffer, in order to show values drawn to back buffer. Video driver is free to choose how this operation is techincally done.
grub_err_t grub_video_create_render_target (struct grub_video_render_target **result, unsigned int width, unsigned int height, unsigned int mode_type);
struct grub_video_render_target {
/* This is private data for video driver. Should not be accessed from elsewhere directly. */
};
Driver will use information provided to it to create best fitting render target. mode_type will be used to guide on selecting what features are wanted for render target. Supported values for mode_type are GRUB_VIDEO_MODE_TYPE_INDEX_COLOR for index color modes, GRUB_VIDEO_MODE_TYPE_RGB for direct RGB color modes and GRUB_VIDEO_MODE_TYPE_ALPHA for alpha component.
grub_err_t grub_video_delete_render_target (struct grub_video_render_target *target);
Used to delete previously created render target. If target contains NULL pointer, nothing will be done. If render target is correctly destroyed, GRUB_ERR_NONE is returned.
grub_err_t grub_video_set_active_render_target (struct grub_video_render_target *target);
Sets active render target. If this comand is successful all drawing commands will be done to specified target. There is also special values for target, GRUB_VIDEO_RENDER_TARGET_DISPLAY used to reference screen’s front buffer, GRUB_VIDEO_RENDER_TARGET_FRONT_BUFFER used to reference screen’s front buffer (alias for GRUB_VIDEO_RENDER_TARGET_DISPLAY) and GRUB_VIDEO_RENDER_TARGET_BACK_BUFFER used to reference back buffer (if double buffering is enabled). If render target is correclty switched GRUB_ERR_NONE is returned. In no any event shall there be non drawable active render target.
grub_err_t grub_video_get_active_render_target (struct grub_video_render_target **target);
Returns currently active render target. It returns value in target that can be subsequently issued back to grub_video_set_active_render_target.
Next: Bitmap API, Previous: Video API, Up: Video Subsystem [Contents][Index]
grub_err_t rc;
/* Try to initialize video mode 1024 x 768 with direct RGB. */
rc = grub_video_setup (1024, 768, GRUB_VIDEO_MODE_TYPE_RGB);
if (rc != GRUB_ERR_NONE)
{
/* Fall back to standard VGA Index Color mode. */
rc = grub_video_setup (640, 480, GRUB_VIDEO_MODE_TYPE_INDEX);
if (rc != GRUB_ERR_NONE)
{
/* Handle error. */
}
}
grub_uint32_t x, y, width, height;
grub_video_color_t color;
struct grub_font_glyph glyph;
grub_err_t rc;
/* Query existing viewport. */
grub_video_get_viewport (&x, &y, &width, &height);
/* Fill background. */
color = grub_video_map_color (GRUB_COLOR_BACKGROUND);
grub_video_fill_rect (color, 0, 0, width, height);
/* Setup console viewport. */
grub_video_set_viewport (x + 10, y + 10, width - 20, height - 20);
grub_video_get_viewport (&x, &y, &width, &height);
color = grub_video_map_color (GRUB_COLOR_CONSOLE_BACKGROUND);
grub_video_fill_rect (color, 0, 0, width, height);
/* Draw text to viewport. */
color = grub_video_map_color (GRUB_COLOR_CONSOLE_TEXT);
grub_font_get_glyph ('X', &glyph);
grub_video_blit_glyph (&glyph, color, 0, 0);
Previous: Example usage of Video API, Up: Video Subsystem [Contents][Index]
grub_err_t grub_video_bitmap_create (struct grub_video_bitmap **bitmap, unsigned int width, unsigned int height, enum grub_video_blit_format blit_format)
Creates a new bitmap with given dimensions and blitting format. Allocated bitmap data can then be modified freely and finally blitted with grub_video_blit_bitmap to rendering target.
grub_err_t grub_video_bitmap_destroy (struct grub_video_bitmap *bitmap);
When bitmap is no longer needed, it can be freed from memory using this command. bitmap is previously allocated bitmap with grub_video_bitmap_create or loaded with grub_video_bitmap_load.
grub_err_t grub_video_bitmap_load (struct grub_video_bitmap **bitmap, const char *filename);
Tries to load given bitmap (filename) using registered bitmap loaders. In case bitmap format is not recognized or supported error GRUB_ERR_BAD_FILE_TYPE is returned.
unsigned int grub_video_bitmap_get_width (struct grub_video_bitmap *bitmap);
Returns bitmap width.
unsigned int grub_video_bitmap_get_height (struct grub_video_bitmap *bitmap);
Return bitmap height.
void grub_video_bitmap_get_mode_info (struct grub_video_bitmap *bitmap, struct grub_video_mode_info *mode_info);
Returns bitmap format details in form of grub_video_mode_info.
void *grub_video_bitmap_get_data (struct grub_video_bitmap *bitmap);
Return pointer to bitmap data. Contents of the pointed data can be freely modified. There is no extra protection against going off the bounds so you have to be carefull how to access the data.
Next: Graphical Menu Software Design, Previous: Video Subsystem, Up: Top [Contents][Index]
| • Introduction: | ||
| • File Structure: | ||
| • Font Metrics: |
Next: File Structure, Up: PFF2 Font File Format [Contents][Index]
The goal of this format is to provide a bitmap font format that is simple to use, compact, and cleanly supports Unicode.
There are many existing bitmap font formats that GRUB could use. However, there are aspects of these formats that may make them less than suitable for use in GRUB at this time:
Inefficient storage; uses ASCII to describe properties and hexadecimal numbers in ASCII for the bitmap rows.
Many format variations such as byte order and bitmap padding (rows padded to byte, word, etc.) would result in more complex code to handle the font format.
Next: Font Metrics, Previous: Introduction, Up: PFF2 Font File Format [Contents][Index]
A file section consists of a 4-byte name, a 32-bit big-endian length (not including the name or length), and then length more section-type-specific bytes.
The standard file extension for PFF2 font files is .pf2.
File type ID (ASCII string). This must be the first section in the file. It has length 4 and the contents are the four bytes of the ASCII string ‘PFF2’.
Font name (ASCII string). This is the full font name including family, weight, style, and point size. For instance, "Helvetica Bold Italic 14".
Font family name (ASCII string). For instance, "Helvetica". This should be included so that intelligent font substitution can take place.
Font weight (ASCII string). Valid values are ‘bold’ and ‘normal’. This should be included so that intelligent font substitution can take place.
Font slant (ASCII string). Valid values are ‘italic’ and ‘normal’. This should be included so that intelligent font substitution can take place.
Font point size (uint16be).
Maximum character width in pixels (uint16be).
Maximum character height in pixels (uint16be).
Ascent in pixels (uint16be). See Font Metrics, for details.
Descent in pixels (uint16be). See Font Metrics, for details.
Character index. The character index begins with a 32-bit big-endian unsigned integer indicating the total size of the section, not including this size value. For each character, there is an instance of the following entry structure:
If equal to 000 binary, then the character data is stored uncompressed beginning at the offset indicated by the character’s offset value.
If equal to 001 binary, then the character data is stored within a compressed character definition block that begins at the offset within the file indicated by the character’s offset value.
A marker that indicates the remainder of the file is data accessed via the character index (CHIX) section. When reading this font file, the rest of the file can be ignored when scanning the sections. The length should be set to -1 (0xFFFFFFFF).
Supported data structures:
Character definition Each character definition consists of:
uint16be.
uint16be.
int16be.
int16be.
int16be.
The length of the bitmap data field is (width * height + 7) / 8 using integer arithmetic, which is equivalent to ceil(width * height / 8) using real number arithmetic.
It remains to be determined whether bitmap fonts usually make all glyph bitmaps the same height, or if smaller glyphs are stored with bitmaps having a lesser height. In the latter case, the baseline would have to be used to calculate the location the bitmap should be anchored at on screen.
Previous: File Structure, Up: PFF2 Font File Format [Contents][Index]
An illustration of how the various font metrics apply to characters.
Next: Lockdown framework, Previous: PFF2 Font File Format, Up: Top [Contents][Index]
| • Introduction_2: | ||
| • Startup Sequence: | ||
| • GUI Components: | ||
| • Command Line Window: |
Next: Startup Sequence, Up: Graphical Menu Software Design [Contents][Index]
The ‘gfxmenu’ module provides a graphical menu interface for GRUB 2. It functions as an alternative to the menu interface provided by the ‘normal’ module, which uses the grub terminal interface to display a menu on a character-oriented terminal.
The graphical menu uses the GRUB video API, which is currently for the VESA BIOS extensions (VBE) 2.0+. This is supported on the i386-pc platform. However, the graphical menu itself does not depend on using VBE, so if another GRUB video driver were implemented, the ‘gfxmenu’ graphical menu would work on the new video driver as well.
Next: GUI Components, Previous: Introduction_2, Up: Graphical Menu Software Design [Contents][Index]
insmod, it will call grub_menu_viewer_register() to register itself.)
Next: Command Line Window, Previous: Startup Sequence, Up: Graphical Menu Software Design [Contents][Index]
The graphical menu implements a GUI component system that supports a container-based layout system. Components can be added to containers, and containers (which are a type of component) can then be added to other containers, to form a tree of components. Currently, the root component of this tree is a ‘canvas’ component, which allows manual layout of its child components.
Components (non-container):
Containers:
The GUI component instances are created by the theme loader in gfxmenu/theme_loader.c when a theme is loaded. Theme files specify statements such as ‘+vbox{ +label { text="Hello" } +label{ text="World" } }’ to add components to the component tree root. By nesting the component creation statements in the theme file, the instantiated components are nested the same way.
When a component is added to a container, that new child is considered owned by the container. Great care should be taken if the caller retains a reference to the child component, since it will be destroyed if its parent container is destroyed. A better choice instead of storing a pointer to the child component is to use the component ID to find the desired component. Component IDs do not have to be unique (it is often useful to have multiple components with an ID of "__timeout__", for instance).
In order to access and use components in the component tree, there are two functions (defined in gfxmenu/gui_util.c) that are particularly useful:
grub_gui_find_by_id (root, id, callback, userdata):
This function ecursively traverses the component tree rooted at root, and for every component that has an ID equal to id, calls the function pointed to by callback with the matching component and the void pointer userdata as arguments. The callback function can do whatever is desired to use the component passed in.
grub_gui_iterate_recursively (root, callback, userdata):
This function calls the function pointed to by callback for every component that is a descendant of root in the component tree. When the callback function is called, the component and the void pointer userdata as arguments. The callback function can do whatever is desired to use the component passed in.
Previous: GUI Components, Up: Graphical Menu Software Design [Contents][Index]
The terminal window used to provide command line access within the graphical
menu is managed by gfxmenu/view.c. The ‘gfxterm’ terminal is used, and
it has been modified to allow rendering to an offscreen render target to allow
it to be composed into the double buffering system that the graphical menu
view uses. This is bad for performance, however, so it would probably be a
good idea to make it possible to temporarily disable double buffering as long
as the terminal window is visible. There are still unresolved problems that
occur when commands are executed from the terminal window that change the
graphics mode. It’s possible that making grub_video_restore() return to
the graphics mode that was in use before grub_video_setup() was called
might fix some of the problems.
Next: Copying This Manual, Previous: Graphical Menu Software Design, Up: Top [Contents][Index]
The GRUB can be locked down, which is a restricted mode where some operations are not allowed. For instance, some commands cannot be used when the GRUB is locked down.
The function
grub_lockdown() is used to lockdown GRUB and the function
grub_is_lockdown() function can be used to check whether lockdown is
enabled or not. When enabled, the function returns ‘GRUB_LOCKDOWN_ENABLED’
and ‘GRUB_LOCKDOWN_DISABLED’ when is not enabled.
The following functions can be used to register the commands that can only be used when lockdown is disabled:
grub_cmd_lockdown() registers command which should not run when the
GRUB is in lockdown mode.
grub_cmd_lockdown() registers extended command which should not run
when the GRUB is in lockdown mode.
Next: Index, Previous: Lockdown framework, Up: Top [Contents][Index]
| • GNU Free Documentation License: | License for copying this manual. |
Up: Copying This Manual [Contents][Index]
Copyright © 2000,2001,2002 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.
A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.
A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document’s overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.
The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work’s title, preceding the beginning of the body of the text.
A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document’s license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version’s license notice. These titles must be distinct from any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.
You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.
To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:
Copyright (C) year your name. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with...Texts.” line with this:
with the Invariant Sections being list their titles, with
the Front-Cover Texts being list, and with the Back-Cover Texts
being list.
If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.
If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.
Previous: Copying This Manual, Up: Top [Contents][Index]
| Jump to: | F |
|---|
| Index Entry | Section | ||
|---|---|---|---|
| | |||
| F | |||
| FDL, GNU Free Documentation License: | GNU Free Documentation License | ||
| | |||
| Jump to: | F |
|---|